Sell Your Cerec Omnicam: Best Price USA
Dentsply Sirona · Dental Equipment · $25,000 – $45,000
Typical pricing - Cerec Omnicam
Cerec Omnicam - Key specifications
- 1024 × 768 resolution intraoral sensor with 0.3mm depth of field - clinically matters because Aspen Dental and Pacific Dental Services both run these because blur kills prep accuracy and remix chair time
- Milling speed up to 1,200 RPM with wet milling capability - directly impacts production: one crown per 15–20 minutes chairside instead of 45+ minutes traditional lab workflow
- Occlusal contact feedback displays in real-time during scanning - prevents remake costs; bad contacts are the #1 reason Cerec units get parked instead of used
- Bluetooth connectivity (model-dependent) with Windows 7/10 embedded OS - wireless scanning cuts cable snags, but know your OS version cold because newer buyer software won't run on old firmware
Cerec Omnicam price overview
Used units at $35K–$40K typically have under 3,000 milling hours and clean service records; anything over 5,000 hours drops to $25K–$28K and needs a full mill bearing inspection. A 12-month service gap kills resale value by 15–20% because buyers assume hidden repair costs.
Buyer's checklist for Cerec Omnicam
Open the mill chamber and look for metal shavings packed in the corners - sign of worn grinding spindle. Run a wet mill test with the included cerec blocks before the buyer sees it; if milling sounds like a coffee grinder instead of a turbine, that's a $3,200 spindle replacement. Check the intraoral handpiece for visible corrosion around the tip and request full calibration records - buyers will verify this themselves and walk if docs are missing.
US Market overview
California DSOs (Heartland Dental, Western Dental) are buying used units at 2–3X the rate they were in 2019 because chair productivity bonuses are now tied directly to same-day crown volume. Texas and Florida markets are equally hot because associate turnover means practices need faster onboarding equipment.
Cerec Omnicam vs alternatives
| Model | Brand | Used Price | Key Spec | Value Score |
|---|---|---|---|---|
| Cerec Omnicam ✓ | Dentsply Sirona | $25,000–$45,000 | CAD/CAM intraoral scanner, same-day crowns... | ●●●●● |
| ProMax 3D Plus | Planmeca | $40,000–$85,000 | CBCT 3D imaging, cephalometric, 23x26cm FOV... | ●●●●○ |
| OP 3D Pro | KaVo | $35,000–$70,000 | CBCT 3D, 16x13cm FOV, low dose... | ●●●●○ |
| Orthophos SL 3D | Dentsply Sirona | $38,000–$75,000 | CBCT panoramic ceph, 11x10cm FOV... | ●●●●○ |
Cerec Omnicam - FAQ
No. The mill is hardwired to the scanner control board. You're buying the whole unit. Dentsply won't sell mills separately to end users - I've tried.
Primescan has a larger field of view (60mm vs. 48mm for Omnicam) and faster occlusal scanning, but a new Primescan runs $65K+. Used Omnicams work fine for single-unit crowns and bridges - Sage Dental still runs 40+ units in their clinics because the ROI on upgrading doesn't pencil.
The unit comes with the mill software embedded. You need an active Dentsply service contract ($2,400–$3,600/year) to get firmware updates and remote diagnostics - non-negotiable for clinics. Without it, you're flying blind on repairs.
Suggest a correction or update for this page
Found outdated specs, wrong pricing, or have first-hand experience with this unit? Help us keep this page accurate.
Why buy through TechCosmetic broker?
Selling this unit directly instead of wholesaling saves the clinic $4,000–$6,000 in margin and saves you 6–8 weeks of inventory carry costs. A clean sale closes in 10–14 days if documentation is bulletproof.