Nomad Pro 2 Rental USA
Aribex · Dental Equipment · $4,000 – $8,000
Typical pricing - Nomad Pro 2
Nomad Pro 2 - Key specifications
- 60 kVp output with 2.5 mA - enough for full periapicals and bitewings without repositioning, which saves 90 seconds per patient versus older 50 kVp units
- Handheld design at 2.5 lbs with tethered cord - fits operatories with zero retrofit cost, unlike wall-mounted Planmeca systems that need electrical rough-in ($1,200–$1,800)
- Digital sensor integration via USB - zero film processing time, straight to Dexis or Dentrix (no scanning step that typical intraoral units require)
- Battery runtime: 4 hours per charge on full periapical protocol - means no downtime between AM/PM shifts on single charge
Nomad Pro 2 price overview
Units with under 1,200 exposure hours and full service records (last calibration within 12 months) hold $6,500–$8,000; anything over 2,000 hours with missing calibration dates drops to $4,000–$4,500. One missing service record cuts $800 off asking.
Buyer's checklist for Nomad Pro 2
Check the battery door seal for corrosion - salt damage costs $600 to replace the battery module and you can't just swap one in. Look at the USB connector for the data cable; if it wobbles, you're replacing the port assembly ($280). Ask for the radiation survey report (not the user manual) - if it's older than 18 months, factor in a $150 recalibration before clinical use.
US Market overview
Western Dental locations in California are rotating out older Nomads for Pro 2s because hygiene volume jumped post-2022, and 50 kVp handhelds were creating retakes. Texas DSOs are slower to upgrade - mostly renting to avoid capex.
Nomad Pro 2 vs alternatives
| Model | Brand | Used Price | Key Spec | Value Score |
|---|---|---|---|---|
| Nomad Pro 2 ✓ | Aribex | $4,000–$8,000 | Handheld portable X-ray... | ●●●●● |
| ProMax 3D Plus | Planmeca | $40,000–$85,000 | CBCT 3D imaging, cephalometric, 23x26cm FOV... | ●●●●○ |
| OP 3D Pro | KaVo | $35,000–$70,000 | CBCT 3D, 16x13cm FOV, low dose... | ●●●●○ |
| Orthophos SL 3D | Dentsply Sirona | $38,000–$75,000 | CBCT panoramic ceph, 11x10cm FOV... | ●●●●○ |
Nomad Pro 2 - FAQ
Yeah. $350–$425/month through Henry Schein or Patterson, 36-month term. You break even around month 15 if you buy used ($6k unit), so only lease if you're testing the workflow or your budget won't flex for capex. Heartland Dental mostly leases to avoid equipment overhead.
Pro 2 has faster image transfer (2-second USB dump vs 5 seconds on Pro 1) and the battery lasts 4 hours instead of 2.5. Pro 1 units sell for $2,500–$3,500 used - if you're budget-capped, it still works, but hygienists will complain about the battery swap mid-day. You're not buying a problem; you're buying two.
Buy = capital equipment, depreciate over 5 years, Section 179 eligible (ask your CPA). Lease = monthly operating expense, deductible in full. Sage Dental rents because they treat it as OpEx and don't want depreciation schedules; that's a CFO decision, not clinical. I don't do taxes, but your accountant will know the answer in one email.
Suggest a correction or update for this page
Found outdated specs, wrong pricing, or have first-hand experience with this unit? Help us keep this page accurate.
Why buy through TechCosmetic broker?
I handle the radiation compliance paperwork and locate units with current calibration certs in 3 days instead of you calling 8 dealers - saves your office manager 6 hours of phone time. Bulk orders of 3+ units across your locations: I negotiate $300/unit off asking, which is $900 in your pocket.