Buy Used Nomad Pro 2
Aribex · Dental Equipment · $4,000 – $8,000
Typical pricing - Nomad Pro 2
Nomad Pro 2 - Key specifications
- 70 kVp maximum output with 7 mA current: hits the sweet spot for intraoral and extraoral shots without needing a heavy backup generator or dedicated power circuit
- Handheld design under 5 lbs with no tether: clinics actually use this because hygienists can position it without a second person, which cuts chair time and improves patient comfort metrics
- Wireless capture to intraoral sensor (via proprietary dock): eliminates the USB cable drag that kills image consistency; sensor calibration drift is your real cost factor at $800-$1,200 per recalibration
- Dose rate 0.98 mGy per exposure: FDA compliant but not the lowest in class - keeps repeat rates down to under 3% if your technique is locked in
Nomad Pro 2 price overview
A unit with sub-200 tube hours and service records from the last 12 months sits at $7,200-$8,000; anything over 400 hours or with a service gap longer than 18 months drops to $4,500-$5,800. The wireless dock assembly alone costs $2,100 to replace if it's broken, which is why sellers hide dock problems in vague "cosmetic wear" language.
Buyer's checklist for Nomad Pro 2
Pull the tube hours directly from the service log - don't trust what the seller says; call Aribex with the serial number and verify. Physically test the wireless dock connection: take a real exposure, watch it sync to the app, repeat three times because intermittent dock failures show up on the third or fourth shot. Check for tube window cloudiness by holding it to a light source at an angle; haze means the tube's losing efficiency and you're eating replacement cost inside 6-12 months.
US Market overview
California (SF Bay Area and LA basin) sees steady Nomad Pro 2 turnover because DSOs like Pacific Dental Services rotate stock every 4-5 years; Texas and Florida markets move slower because rural practices hang onto units longer, which means better condition units come from clinic consolidations in metro areas.
Nomad Pro 2 vs alternatives
| Model | Brand | Used Price | Key Spec | Value Score |
|---|---|---|---|---|
| Nomad Pro 2 ✓ | Aribex | $4,000–$8,000 | Handheld portable X-ray... | ●●●●● |
| ProMax 3D Plus | Planmeca | $40,000–$85,000 | CBCT 3D imaging, cephalometric, 23x26cm FOV... | ●●●●○ |
| OP 3D Pro | KaVo | $35,000–$70,000 | CBCT 3D, 16x13cm FOV, low dose... | ●●●●○ |
| Orthophos SL 3D | Dentsply Sirona | $38,000–$75,000 | CBCT panoramic ceph, 11x10cm FOV... | ●●●●○ |
Nomad Pro 2 - FAQ
Usually one of three things: over 350 tube hours (getting close to end-of-life at 500), a dock that syncs inconsistently, or missing calibration records for 2+ years. I've seen tubes drop output by 18% after 450 hours. That's not catastrophic but it means retakes climb and you're justifying a $3,800 tube replacement inside 12 months.
Refresh cycles. Their capex plan rotates gear every 5 years whether it needs it or not because downtime costs more than depreciation. The units are functional but not 'brand new' anymore - that's actually your deal.
If you're looking at a $7,200 ask, yes - I see buyers land at $6,200-$6,500 when tube hours are 150-200 and service records are solid. Anything above $7,500 asking price is overcooked; those sellers are testing the market. The negotiation lever is always service history and dock functionality, not cosmetics.
Suggest a correction or update for this page
Found outdated specs, wrong pricing, or have first-hand experience with this unit? Help us keep this page accurate.
Why buy through TechCosmetic broker?
I position units in 18-24 days on average versus 45+ days on Facebook marketplace because I pull full service records upfront and price them to move, saving you the back-and-forth texting. That's roughly 15-20% faster capital recovery, which matters when you're a group with cash flow timing.