Nomad Pro 2 Price Guide: Used Aribex
Aribex · Dental Equipment · $4,000 – $8,000
Typical pricing - Nomad Pro 2
Nomad Pro 2 - Key specifications
- 60 kVp output with 2.5 mA - enough for full mouth series and bitewings without repeat shots, which saves chair time vs. cheaper handheld units capped at 50 kVp
- Wireless capability (2.4 GHz) eliminates cord drag issues, but requires functioning Bluetooth module replacement at $800–$1,200 if damaged
- Lithium battery rated 8–10 hours per charge - units with 3,000+ charge cycles (age 5+ years) drop to 4–6 hours, creating silent $1,500 battery pack swap
- Digital sensor with 0.5 mm resolution and 22 mm × 35 mm capture area - meets ADA standards and dental schools won't accept grainy knockoffs
Nomad Pro 2 price overview
A unit with under 2,000 battery cycles and clean service logs sits at $6,500–$8,000. Same machine with a gap in maintenance records or visible battery degradation? Drop $1,500–$2,000 because you're inheriting unknown repair risk.
Buyer's checklist for Nomad Pro 2
Power it on in person and watch the boot sequence - slow startup (over 20 seconds) signals failing battery or sensor board issues. Check the charging port for corrosion or loose connections; replacement runs $400. Ask for battery cycle count from the seller; if they can't produce it or dodge the question, walk.
US Market overview
California and Texas clinics eat these up because mobile practices and satellite locations can't justify wall-mounted systems. Pacific Dental Services alone runs 900+ locations and buys used portables in bulk when they refresh.
Nomad Pro 2 vs alternatives
| Model | Brand | Used Price | Key Spec | Value Score |
|---|---|---|---|---|
| Nomad Pro 2 ✓ | Aribex | $4,000–$8,000 | Handheld portable X-ray... | ●●●●● |
| ProMax 3D Plus | Planmeca | $40,000–$85,000 | CBCT 3D imaging, cephalometric, 23x26cm FOV... | ●●●●○ |
| OP 3D Pro | KaVo | $35,000–$70,000 | CBCT 3D, 16x13cm FOV, low dose... | ●●●●○ |
| Orthophos SL 3D | Dentsply Sirona | $38,000–$75,000 | CBCT panoramic ceph, 11x10cm FOV... | ●●●●○ |
Nomad Pro 2 - FAQ
Most Nomad Pro 2 units connect to Dexis, Schick, or Carestream via USB, not directly. You'll need the right adapter cable ($120–$200). Check compatibility before you buy - some older software patches don't play nice with newer firmware.
Sensor replacement through Aribex runs $1,800–$2,400 plus labor. That's real money. A unit with a cracked sensor showing black lines in images? Price should drop $2,500 minimum or don't touch it.
Look for hairline cracks around the battery compartment and listen for loose rattling inside when powered off. Check the hand grip for dents or missing rubber sections. If the seller has no service records but the cosmetics are pristine, that's a red flag - dropped units usually show it.
Suggest a correction or update for this page
Found outdated specs, wrong pricing, or have first-hand experience with this unit? Help us keep this page accurate.
Why buy through TechCosmetic broker?
I can verify actual battery health and sensor function before you buy - saves you a $1,200 surprise swap 60 days later. That verification takes 15 minutes and keeps your acquisition cost honest.