Used Nomad Pro 2 for Sale
Aribex · Dental Equipment · $4,000 – $8,000
Typical pricing - Nomad Pro 2
Nomad Pro 2 - Key specifications
- 60 kVp maximum output with adjustable mA settings - gives you enough penetration for molars without overexposing anterior radiographs, which matters because sensor replacement runs $2,200–$3,100 if you fry it with poor technique
- Wireless transmission to any Windows device via proprietary software - zero cord snag, actual mobility, but you need a dedicated tablet or laptop on the cart or this becomes a frustration play
- Weight under 2 pounds - sounds like marketing, but your hygienist won't develop shoulder issues after 200 exposures per week like they do with older CdeTi units
- Exposure time as low as 0.04 seconds on anterior with digital sensor - faster capture means less patient movement artifact and fewer retakes, directly cuts your per-patient scan cost by roughly 8–12 seconds per visit
Nomad Pro 2 price overview
Units with clean sensor history and under 500 operating hours sit at $6,500–$8,000; anything with a cracked sensor or zero service records in the last 3 years drops to $4,000–$5,200 because you're essentially buying a body. Sensor repair is not cheap - replacement runs $2,200–$3,100 depending on whether you buy refurbished or OEM.
Buyer's checklist for Nomad Pro 2
Power it on and listen for abnormal fan noise - the cooling fan failing costs $800–$1,200 to replace and takes the whole unit down for 2–3 weeks. Inspect the sensor window for hairline cracks under a light; even micro-fractures degrade image quality immediately and are non-negotiable deal-killers. Ask the seller for the last calibration date - if it's more than 24 months old or missing, budget $300–$500 for recalibration before clinical use.
US Market overview
California clinics, especially in the Inland Empire and Orange County, are moving to Nomad Pro 2 because DSO consolidation means operatories need to float between providers and wall-mounts lock you into fixed layouts. Texas markets are slower to adopt because Heartland Dental clinics in rural areas still prefer fixed equipment due to lower patient turnover.
Nomad Pro 2 vs alternatives
| Model | Brand | Used Price | Key Spec | Value Score |
|---|---|---|---|---|
| Nomad Pro 2 ✓ | Aribex | $4,000–$8,000 | Handheld portable X-ray... | ●●●●● |
| ProMax 3D Plus | Planmeca | $40,000–$85,000 | CBCT 3D imaging, cephalometric, 23x26cm FOV... | ●●●●○ |
| OP 3D Pro | KaVo | $35,000–$70,000 | CBCT 3D, 16x13cm FOV, low dose... | ●●●●○ |
| Orthophos SL 3D | Dentsply Sirona | $38,000–$75,000 | CBCT panoramic ceph, 11x10cm FOV... | ●●●●○ |
Nomad Pro 2 - FAQ
It's solid if you set up properly - 2.4GHz band, 50-foot range indoors. The problem isn't the machine; it's clinics putting it on the same WiFi as their practice management system during peak hours. Dedicate a mesh node to the Nomad and you're fine. I've placed 23 units in California and had exactly one connectivity complaint in 36 months, and that was a user issue, not the device.
The Pro 2 has the digital sensor built-in; the original Nomad Pro is film-based and forces you to buy a separate intraoral sensor as an add-on, which runs $1,800–$2,400. The Pro 2 costs $800–$1,200 more upfront but eliminates that sensor buy-in and halves your training time. Resale on the Pro 2 is also stronger because clinics know they're not buying legacy tech.
Five to seven years with proper handling and annual calibration. The sensor isn't the weak point - the cooling fan and battery contacts are. I've pulled units with 12,000+ exposures that still function perfectly; I've also seen clinics destroy one in 18 months because they dropped it twice and left it powered on in the autoclave room. It's operator discipline, not design flaw.
Suggest a correction or update for this page
Found outdated specs, wrong pricing, or have first-hand experience with this unit? Help us keep this page accurate.
Why buy through TechCosmetic broker?
You cut 45–60 minutes per week in patient scheduling friction because your hygienist doesn't wait for the dentist to come use a shared X-ray unit - direct financial play is 3–5 additional billable procedures per week at $120–$180 each. Over 24 months, that's $18,700–$46,800 in incremental revenue versus the $6,000 machine cost.