Sciton · Aesthetic Lasers · $30,000 – $55,000
You'll pay $5k–$8k more for units under 100k pulses and full manufacturer service records vs. a 240k-pulse machine missing maintenance docs from years 3–5. A gap like that tanks resale by 20–30% because you can't verify if thermal management was compromised.
Open the handpiece connector under bright light - look for carbon buildup or pitting on the pins; that signals heavy use or poor cooling cycles and means optics are next. Run a test fire on a test card and measure spot uniformity with a ruler; if the edge is visibly dimmer, the beam path optics need replacement ($3,100–$3,900). Check the water circulation pump; listen for grinding or rattling when the system boots - a dead pump rebuild is $1,600 and a 2-week lead time.
Southern California (especially LA and Orange County) sees the most used Moxi volume because Ideal Image and SkinSpirit have 40+ locations there and cycle equipment aggressively every 4–5 years. Texas and Florida markets are tighter; you'll pay 8–12% more in Houston or Miami because supply is half what it is in SoCal.
| Model | Brand | Used Price | Key Spec | Value Score |
|---|---|---|---|---|
| Moxi ✓ | Sciton | $30,000–$55,000 | 1927nm non-ablative, tone/texture... | ●●●●● |
| GentleMax Pro | Candela | $18,000–$32,000 | 755nm/1064nm dual wavelength, hair removal, v... | ●●●○○ |
| Elite iQ | Cynosure | $22,000–$40,000 | 755nm/1064nm Skintel melanin reader, hair rem... | ●●●○○ |
| LightSheer Duet | Lumenis | $15,000–$28,000 | 805nm diode, high-speed vacuum handpiece... | ●●●○○ |
Yeah. Sona MedSpa and Schweiger Dermatology both lease. You're looking at $2,800–$3,600/month for newer stock or $2,200–$2,800 for a 2–3-year-old unit. Lease breaks even against a $40k buy in 12–14 months if you're running 12+ treatments weekly; after that, you're just throwing money away. Buy if your case load is locked and consistent.
Direct lease from Sciton is $3,400–$4,200/month, full support, parts included. Used buy is $30k–$55k upfront, zero warranty unless you pay extra ($2,400–$3,800/year), and you own every failure. The math: lease $3,800/month × 24 months = $91,200 total spend. Buy a $45k unit, add $2,600/year service for 5 years = $58k total. You own hardware at the end, but you bet on reliability.
Don't buy on price alone. Get thermal imaging data (I provide it) - normal operating temps are 38–42°C at the handpiece connector after 10 minutes of firing. Anything above 44°C means the cooling loop is clogged and you're 3–6 months from optical failure. Also demand full service records and ask if it's had a capacitor bank refresh (happens around 150k pulses, costs $2,100 if done right).
Found outdated specs, wrong pricing, or have first-hand experience with this unit? Help us keep this page accurate.
I skip the 3-week manufacturer paperwork shuffle and do a 72-hour full bench test, so you're operational in 10 days instead of a month. I also know which units had extended service contracts (they run $18k–$24k total cost of ownership over 5 years), so you avoid the surprise $7,200 repair in year 3.