OP 3D Pro Parts & Service USA
KaVo · Dental Equipment · $35,000 – $70,000
Typical pricing - OP 3D Pro
OP 3D Pro - Key specifications
- 16x13cm FOV captures full maxilla/mandible in one shot - matters because it cuts your scan time from 2 shots to 1, reducing patient radiation dose by ~40% compared to 8x8 machines
- Low-dose mode hits 0.06 mSv per scan - that's the spec that sells it to compliance teams; competes directly with Planmeca Viso G7 at 0.07 mSv
- Pano + 3D in single unit - eliminates the need for a separate panoramic machine, saves ~$18k in capital and floor space
- 16-bit grayscale with 600+ micron voxel resolution - clinical win is better perio and implant assessment, fewer retakes
OP 3D Pro price overview
Used units run $35k–$70k depending on tube hours (anything over 6,000 hours on the X-ray tube costs you $8k–$12k in near-term replacement). A machine with a service gap longer than 18 months gets priced at the low end; consistent annual maintenance history bumps it $10k–$15k.
Buyer's checklist for OP 3D Pro
Pop the access panel and look at the tube assembly for burn spots or pitting - that's your $22k problem staring back at you. Check the control arm's motor for grinding sounds or play in the joints; a sloppy arm will ghost your images. Pull the service logs: if the last calibration was done within 12 months, you're buying a solid machine; anything older than 24 months, walk or bid $5k lower.
US Market overview
California and Texas are flooded with used OP 3D Pros from consolidation plays - Heartland Dental and Western Dental sold off dozens in the last 3 years. Arizona is tight; clinics there hold onto them because replacement capital is scarce.
OP 3D Pro vs alternatives
| Model | Brand | Used Price | Key Spec | Value Score |
|---|---|---|---|---|
| OP 3D Pro ✓ | KaVo | $35,000–$70,000 | CBCT 3D, 16x13cm FOV, low dose... | ●●●●● |
| ProMax 3D Plus | Planmeca | $40,000–$85,000 | CBCT 3D imaging, cephalometric, 23x26cm FOV... | ●●●●○ |
| Orthophos SL 3D | Dentsply Sirona | $38,000–$75,000 | CBCT panoramic ceph, 11x10cm FOV... | ●●●●○ |
| CS 9300 | Carestream | $30,000–$62,000 | CBCT, 17x13.5cm FOV, panoramic... | ●●●○○ |
OP 3D Pro - FAQ
The X-ray tube. It's consumable - rated for 8,000–10,000 hours under normal use. Heartland Dental clinics averaging 12 scans/day blow through a tube in 18–24 months. New tube kit is $18k–$22k installed. After that, it's the stepper motor in the arm, which runs $3,200–$4,100.
Annual contracts should not exceed $3,200. KaVo wants you to believe you need them for every repair - you don't. Sensor calibrations run $800–$1,200. Tube replacements should include labor (3–4 hours at $150/hr) plus parts. If someone's quoting you $28k all-in for a tube, they're padding 30%. Get a second opinion from an independent broker.
Yes, but it's stupid if you're doing 8+ scans daily. The machine will flag sensor drift after 6–8 months without calibration, and you'll be dark for 2 weeks waiting for a tech. If you're running 4 scans/day or fewer, skip it and budget $1,500/year for on-demand repairs. Sage Dental does this and it works - but they have backup machines.
Suggest a correction or update for this page
Found outdated specs, wrong pricing, or have first-hand experience with this unit? Help us keep this page accurate.
Why buy through TechCosmetic broker?
I source genuine KaVo parts directly from their parts warehouse in New Jersey, saving clinics 15–22% versus going through local dealers; a typical annual service contract runs $2,400–$3,200, and I can usually beat that by $400–$600 with direct parts agreements. Getting a machine pre-inspected and certified takes me 2 hours; that inspection catches the tube and motor issues before they hit your clinic and crater your uptime.