CS 9300 Review: Reliability & Specs
Carestream · Dental Equipment · $30,000 – $62,000
Typical pricing - CS 9300
CS 9300 - Key specifications
- 17x13.5cm FOV captures full maxilla and mandible in one scan - matters because smaller FOV units like the CS 8100 require two scans, doubling radiation and chair time
- Panoramic mode included with the CBCT - eliminates need for separate panoramic hardware, saves roughly $8,000–$12,000 in cabinet space and initial invest
- Scan time 5.8 seconds (standard mode) - clinically relevant because faster acquisition = less patient motion artifact and fewer re-scans that cost you $2–3 per retake
- 17.5 micron voxel resolution - adequate for implant planning and endo work, but not surgical guide-level precision like the Planmeca ProMax 3D Max which hits 75 microns
CS 9300 price overview
Units with under 2000 total scan hours sit $55,000–$62,000; anything over 3500 hours drops to $30,000–$40,000 because tube replacement runs $8,500–$11,200. Missing service records for the last 24 months kills $5,000–$8,000 off asking price.
Buyer's checklist for CS 9300
Pop the side panel and check the x-ray tube - look for discoloration or corrosion around the connector, which means water damage or coolant leaks that cost $3,000+ to fix. Run a test scan on a phantom and grab the DICOM file; compare noise levels to the original spec sheet if available. Ask the clinic directly how many re-scans per month they averaged - anything over 8% means calibration drift or patient motion issues.
US Market overview
Southwest (Arizona, Nevada) has heavy demand because DSOs like Heartland Dental and Sage Dental are expanding there and need imaging fast. California urban centers stay competitive because rent-per-operatory is brutal, so practices upgrade more frequently.
CS 9300 vs alternatives
| Model | Brand | Used Price | Key Spec | Value Score |
|---|---|---|---|---|
| CS 9300 ✓ | Carestream | $30,000–$62,000 | CBCT, 17x13.5cm FOV, panoramic... | ●●●●● |
| ProMax 3D Plus | Planmeca | $40,000–$85,000 | CBCT 3D imaging, cephalometric, 23x26cm FOV... | ●●●●○ |
| OP 3D Pro | KaVo | $35,000–$70,000 | CBCT 3D, 16x13cm FOV, low dose... | ●●●●○ |
| Orthophos SL 3D | Dentsply Sirona | $38,000–$75,000 | CBCT panoramic ceph, 11x10cm FOV... | ●●●●○ |
CS 9300 - FAQ
Not really. You get decent implant planning and basic ortho assessment, but surgical reconstruction cases need something like the Planmeca ProMax 3D Max (26x16.5cm FOV). If your clinic does complex maxfax work, this machine is a step down.
Gantry motor failure shows up around 4,200–4,800 hours, which is roughly 4–5 years at high-volume clinics. Replacement is $1,800–$2,400 in parts and labor. If you're buying a unit above 4,500 hours, assume you're doing this work in year one.
Yes, but not comfortably. You're looking at roughly 8–12 CBCT scans daily in that scenario, which puts you on a harder maintenance cycle. Lightspeed the hygiene schedule and budget $2,400–$2,800 annually in preventive service calls instead of reactive ones.
Suggest a correction or update for this page
Found outdated specs, wrong pricing, or have first-hand experience with this unit? Help us keep this page accurate.
Why buy through TechCosmetic broker?
I save buyers 4–6 weeks of back-and-forth because I pull actual service tickets from Carestream before you talk to the clinic. One quick PM schedule check tells me if that $45,000 unit is about to hit a $4,200 tube replacement or not.